en
Русский [ru]
HG-WED
Description:
The WED ring scraper is a combined profile where the seal is equipped with a wiping edge on the outside and a sealing lip inside.
Dimensions are interchangeable when installing the wiper in standard grooves.
Scraped edge is very flexible, can even out the deviation of the rod. The sealing portion has a harder and longer edge for providing a sealing action and maintaining the lubricating layer on the stem.
Technical specifications:
Pressure: < 20 bar.
Speed: < 1 m/s.
Temperature: from -35В°C to +100В°C with a peak value of +110В°C.
Operating environment: water at room temperature, mineral oils (see Table 1 on page 1.2.4).
Material:
Name: polyurethane type ""C0"" with high modulus of elasticity, low permanent deformation and high abrasion resistance.
Hardness: Shore 93 A 2. It is also possible to use more rigid types of polyurethane for more polluted working conditions.
Material code: C0.
Installation:
The installation becomes much easier, since it can be produced in a semi-open groove.
It is recommended that the permissible surface roughness of the landing groove.
(For more information, see the Installation Instructions on page 1.2.14).
- Description
Description:
The WED ring scraper is a combined profile where the seal is equipped with a wiping edge on the outside and a sealing lip inside.
Dimensions are interchangeable when installing the wiper in standard grooves.
Scraped edge is very flexible, can even out the deviation of the rod. The sealing portion has a harder and longer edge for providing a sealing action and maintaining the lubricating layer on the stem.
Technical specifications:
Pressure: < 20 bar.
Speed: < 1 m/s.
Temperature: from -35В°C to +100В°C with a peak value of +110В°C.
Operating environment: water at room temperature, mineral oils (see Table 1 on page 1.2.4).
Material:
Name: polyurethane type ""C0"" with high modulus of elasticity, low permanent deformation and high abrasion resistance.
Hardness: Shore 93 A 2. It is also possible to use more rigid types of polyurethane for more polluted working conditions.
Material code: C0.
Installation:
The installation becomes much easier, since it can be produced in a semi-open groove.
It is recommended that the permissible surface roughness of the landing groove.
(For more information, see the Installation Instructions on page 1.2.14).
