en
Русский [ru]
Universal rotary joint of UOPM series
Analog:
DEUBLIN 55 / 57, JOHNSON R / RX, ROTOFLUX S, DUFF NORTON 600 / 805 / 5000, MEIER DX / DXS
Flow:
unidirectional
Seal material:
- carbon graphite / tungsten carbide - UOPM A
- carbon graphite / stainless steel - UOPM B
- silicon carbide / silicon carbide - UOPM C
Application:
- pulp and paper industry
- textile industry
- rubber industry
- food industry
- chemical industry
The rotary joints for unidirectional flow are used if the fluid medium is supplied at one end of the cylinder and exits at the other end, and there is only one liquid flow through one rotary joint. In such cases, two rotary joints are used - one at the process input and the other at the process output.
fluid medium | type |
t max (В°C) |
p max (bar) |
water |
UOPM A |
150 |
40 |
| UOPM Р’ | 150 | 40 | |
| UOPM C | 150 | 40 | |
vapor |
UOPM A |
||
| UOPM Р’ | |||
| UOPM C | |||
oil |
UOPM A |
150 |
40 |
| UOPM Р’ | 150 | 40 | |
| UOPM C | 150 | 40 |
Rotary joint: UOPM A
The UOPM A type universal rotary joint has a wide range of application (for water, air, oils and chemically aggressive fluid medium). Its stainless steel parts ensure high resistance to corrosion, whereas the application of secondary seals allow using the connections at high temperatures and prolong their service life.
Rotary joint: UOPM B
The universal rotary joint of UOPM B type is predominantly recommended for use in applications where hot oil is used as the process liquid.
Rotary joint: UOPM C
The universal rotary joint of UOPM C type is designed for use exclusively in abrasive process liquids where solid particles may be squeezed out into the sealing surface if the sealing surface used is too soft.
Production of branch pipes by the customer's sizes is possible.
- Description
Analog:
DEUBLIN 55 / 57, JOHNSON R / RX, ROTOFLUX S, DUFF NORTON 600 / 805 / 5000, MEIER DX / DXS
Flow:
unidirectional
Seal material:- carbon graphite / tungsten carbide - UOPM A
- carbon graphite / stainless steel - UOPM B
- silicon carbide / silicon carbide - UOPM C
Application:
- pulp and paper industry
- textile industry
- rubber industry
- food industry
- chemical industry
The rotary joints for unidirectional flow are used if the fluid medium is supplied at one end of the cylinder and exits at the other end, and there is only one liquid flow through one rotary joint. In such cases, two rotary joints are used - one at the process input and the other at the process output.
fluid medium
type
t max (В°C)
p max (bar)
water
UOPM A
150
40
UOPM Р’ 150 40 UOPM C 150 40 vapor
UOPM A
UOPM Р’ UOPM C oil
UOPM A
150
40
UOPM Р’ 150 40 UOPM C 150 40
Rotary joint: UOPM A
The UOPM A type universal rotary joint has a wide range of application (for water, air, oils and chemically aggressive fluid medium). Its stainless steel parts ensure high resistance to corrosion, whereas the application of secondary seals allow using the connections at high temperatures and prolong their service life.
Rotary joint: UOPM B
The universal rotary joint of UOPM B type is predominantly recommended for use in applications where hot oil is used as the process liquid.
Rotary joint: UOPM C
The universal rotary joint of UOPM C type is designed for use exclusively in abrasive process liquids where solid particles may be squeezed out into the sealing surface if the sealing surface used is too soft.
Production of branch pipes by the customer's sizes is possible.- Name
- Universal rotary joint of UOPM series
